aC5 dimensions are shown: inches (mm) specifications and dimensions subject to change www .ittcannon.com a pu shbu tt on c&k gp series sealed ultraminiature pushbutton switches gp12 model terminal nos. for reference only. features/benefits ? ultraminiature design saves space ? process compatible, withstands most soldering and washing processes ? thru-hole and surface mount models available ? sealed constructionnternal o--ing and epoxy base ? rohs compliant t ypical applications ? telecommunications and network equipment ? computers and peripheral products ? instrumentation specifications contact rating: 0.4 va max. @ 20 v ac or dc max. mechanical & electrical life: 40,000 make-and-break cycles at full load. contact resistance: below 50 m typ. initial @ 2-4 v dc, 100 ma. insulation resistance: 10 9 min. dielectric strength: 500 v rms min. @ sea level. operating temperature: C0?oto 85?. solderability: per mil-std-202f method 208d, or eia rs-186e method 9 (1 hour steam aging). degree of protection: ip57; protection against harmful dust deposit, full-scale voltage protection, temporary immersion. p ackaging: surface mount switches standar d in anti-static tape and reel packaging per eia 481-3, see page a-78 for drawings and reel information. all models ar e rohs compliant and compliant. materials housing & base: glass filled nylon 4/6, flame retardant, heat stabilized (ul 94v-0). actuator: glass filled nylon 4/6, flame retardant (ul 94v-0) with standard internal o-ring seal. switch support: brass, tin plated. movable contact: copper alloy, with gold plate over nickel plate. st ationary contacts copper alloy, with gold plate over nickel plate. terminals: copper alloy, with gold flash over nickel plate. terminal seal: epoxy/urethane. all terminals insert molded. note: any models supplied with b contact material are rohs compliant and compatible. for the latest information regarding rohs compliance, please go to: www.ittcannon.com/rohs. note: materials listed above ar e general specifications. specifications available for specific and custom switches, consult customer service center. caution: pc mounting layouts and pads as shown are designed to be compatible with the latest equipment and r eflow techniques. car e should be taken in the design and location of pc lands to suit individual needs. orientation relative to reflow direction may significantly impact solder joint integrity. how to order complete part numbers for gp series sealed ultraminiatur e pushbutton switches are shown on pages a-76 thru a-78. spdt on mom. 2-1 2-3 gp12mcbe conn. terms. spst off mom. open 1-3 gp11mcbe conn. terms. schematic switch function pos.1 pos. 2 part number mom. = momentary gp11mcbe spst
aC6 dimensions are shown: inches (mm) specifications and dimensions subject to change www .ittcannon.com third angle projection c&k gp series sealed ultraminiature pushbutton switches gp12 model terminal nos. for reference only. spdt on mom. 2-1 2-3 gp12mabe conn. terms. spst off mom. open 1-3 gp11mabe conn. terms. schematic switch function pos.1 pos. 2 part number mom. = momentary spdt on mom. 2-1 2-3 gp12msabe conn. t erms. spst off mom. open 1-3 gp1 1msabe conn. t erms. schematic switch function pos.1 pos. 2 part number mom. = momentary spst off mom. open 1-3 gp1 1msa1be conn. terms. schematic switch function pos.1 pos. 2 part number mom. = momentary gp11msa1be spst GP11MSABE spst gp11mabe spst gp12msa1be conn. t erms. on mom. 2-1 2-3 spdt smt smt a pu shbu tt on
aC7 dimensions are shown: inches (mm) specifications and dimensions subject to change www .ittcannon.com third angle projection c&k gp series sealed ultraminiature pushbutton switches terminal nos. for reference only. pc mounting pc mounting gp11 models note: recommended for infrequent use applications only for increased switch mounting strength, order, sv1 termination style with support bracket (see below). spdt on mom. 2-1 2-3 gp12msv1be conn. terms. spst off mom. open 1-3 gp11msv1be conn. terms. schema tic switch function pos.1 pos. 2 p art number mom. = momentary spdt on mom. 2-1 2-3 gp12mscbe conn. terms. schematic switch function pos.1 pos. 2 part number mom. = momentary gp11msv1be spst gp12mscbe spdt smt smt a pu shbu tt on
tape & reel c&k gp series sealed ultraminiature pushbutton switches gp12msv1be gp11 msv1be ? 0. 059 (? 1, 50) .0 6 9 (1 , 76) .1 5 7 (4 , 00) .9 4 5 (2 4 ,0 0 ) .2 9 9 (7 , 60) .0 7 9 (2 , 00) .4 5 3 (1 1 , 51) fe e d d ir ec t ion outside diameter 13.00 (330,0) pilot hole .512 (13,0) quantity per reel 600 reel information outside diameter 13.00 (330,0) pilot hole .512 (13,0) quantity per reel 600 reel information for part numbers gpxxsa1be, gpxxmcbe, gpxxmsabe for part numbers gp11msv1be, gp12msv1be b outside diameter 13.00 (330,0) pilot hole .512 (13,0) quantity per reel 600 reel information for part numbers gp12mscbe third angle projection dimensions are shown: inches (mm) specifications and dimensions subject to change www .ittcannon.com aC8 a pu shbu tt on
|
